# Preferred Frame Writing [🏠 Home](/) - [About](/about.md.html) - [Submissions](/submissions.md.html) - [Policies](/policies.md.html) - [Journals](/journals.md.html) ---
# Multiplication and Powers The previous chapter defined term-type-aware addition. Before the angular and exponential tools used in later chapters can rest on a rigorous foundation, scalar multiplication must be defined. ## Multiplication Let $U=u^2$ and $V=v^2$ be ultrareals with scalar natural inner states. Their product is: $$ U \cdot V = (uv)^2. $$ The inner magnitude of a product is the product of the inner magnitudes. Since $u,v\ge0$, the product $uv\ge0$, so $(uv)^2\in\mathbb U$. Multiplication is closed. In the ordinary scalar case, multiplication is commutative: $$ U\cdot V=(uv)^2=(vu)^2=V\cdot U. $$ In the ordinary scalar case, multiplication is associative: Let $W=w^2$. Then: $$ (U\cdot V)\cdot W=((uv)w)^2=(u(vw))^2=U\cdot(V\cdot W). $$ Multiplicative identity: The ultrareal $1=1^2$ satisfies: $$ 1\cdot U=(1\cdot u)^2=u^2=U. $$ Absorption at zero: $$ 0\cdot U=(0\cdot u)^2=0. $$ ## Distributivity Whether multiplication distributes over addition depends on what the relevant addition does to inner magnitudes. For the natural scalar ultrareal addition $U+V=(u+v)^2$, the inner magnitude of a sum is the sum of inner magnitudes. Under this term-type rule the proof proceeds at the inner magnitude layer. The inner magnitude of $V+W$ is $v+w$. Therefore the inner magnitude of $U\cdot(V+W)$ is: $$ u\cdot(v+w)=uv+uw. $$ The inner magnitude of $U\cdot V$ is $uv$. The inner magnitude of $U\cdot W$ is $uw$. The inner magnitude of $(U\cdot V)+(U\cdot W)$ is: $$ uv+uw. $$ Both sides square the same inner magnitude. Therefore, for the natural scalar addition: $$ U\cdot(V+W)=U\cdot V+U\cdot W. $$ For a general descriptor $d$, the inner magnitude of $V+W$ is $\sqrt{v^2+d(V,W)+w^2}$, which is not $v+w$ unless $d(V,W)=2vw$. In that case, the inner magnitude of $U\cdot(V+W)$ is $u\sqrt{v^2+d(V,W)+w^2}$, and the inner magnitude of $U\cdot V+U\cdot W$ depends on $d(UV,UW)$. Equality requires: $$ d(UV,UW)=U\cdot d(V,W). $$ Here $U\cdot d(V,W)$ is ordinary scalar scaling of the descriptor by the visible value $U=u^2$. This is a compatibility condition on the descriptor. It holds for the angular descriptor $d(V,W)=2vw\cos\Delta$ when the angle $\Delta$ is preserved under scaling by $U$. It is not automatic and should not be assumed without verification for a given $d$. ## Integer Powers For $U=u^2$ and a nonnegative integer $n$, define: $$ U^n=(u^n)^2. $$ The inner magnitude of $U^n$ is $u^n$. Since $u\ge0$, $u^n\ge0$ for all $n\ge0$, so $U^n\in\mathbb U$. Base cases: $U^0=(u^0)^2=1$ and $U^1=u^2=U$. **Power law:** $$ U^n\cdot U^m=(u^n)^2\cdot(u^m)^2=(u^n\cdot u^m)^2=(u^{n+m})^2=U^{n+m}. $$ **Power of a product:** $$ (U\cdot V)^n=((uv)^2)^n=((uv)^n)^2=((u^n)(v^n))^2=U^n\cdot V^n. $$ ## Two Exponential Layers Integer powers being defined, a power series in $U$ is now meaningful: $$ \sum_{n=0}^{\infty}a_n U^n=\sum_{n=0}^{\infty}a_n(u^n)^2, $$ provided the series converges. Applied to the standard exponential coefficients: $$ e^U=\sum_{n=0}^{\infty}\frac{U^n}{n!}=\sum_{n=0}^{\infty}\frac{u^{2n}}{n!}=e^{u^2}. $$ This is the value-layer exponential: the standard real exponential evaluated at the visible value. Its output is an ultrareal. A second exponential lives at the presentation layer. If the symbol $i$ is adjoined with $i^2=-1$, the power series may be evaluated at a purely imaginary argument $i\theta$: $$ e^{i\theta}=\sum_{n=0}^{\infty}\frac{(i\theta)^n}{n!}. $$ This series converges absolutely for every real $\theta$. Its value is a complex number of modulus one. It is not an ultrareal. It is an orientation — a unit presentation carrying direction without inner magnitude other than one. The two exponentials belong to different layers: $$ \begin{aligned} \text{value layer:}\quad &e^U=e^{u^2},\qquad U\in\mathbb U,\\ \text{presentation layer:}\quad &e^{i\theta}=\cos\theta+i\sin\theta,\qquad\theta\in\mathbb R. \end{aligned} $$ The derivation of Euler's formula — that $e^{i\theta}=\cos\theta+i\sin\theta$ — is given in Chapter 004. Multiplication of ultrareals is not required for that derivation. What is required is multiplication under the power series with the single rule $i^2=-1$. That rule was introduced as the definition of the adjoined symbol, not as a consequence of ultrareal arithmetic.
--- - [Preferred Frame Writing on GitHub.com](https://github.com/siran/writing) (built: 2026-04-28 15:03 EDT UTC-4)